Sistemas usados

Nuestra cartera incluye además de una amplia gama de maquinaria nueva, máquinas de segunda mano y procedentes de exposiciones, útiles para muchas aplicaciones en el campo de acabado a vibracióngranallado. Todas las máquinas de ocasión están en buenas condiciones y se pueden ampliar, modernizar o pintar de acuerdo con los requerimientos del cliente.

Rösler también ofrece un paquete integral de servicios y mantenimiento para todos los equipos usados de otros fabricantes.

TitleCentrifuge
Type Z800(K-)-H-A-Turbo-Floc
LocationNL
Year Of Manufacture2008
DescriptionThe RÖSLER centrifuge has been specifically designed for the cleaning of process water of vibratory (mass) finishing installations. The process water is cleaned in circulation and re-used in each case (with no discharge into the sewer). Of course, this machine is also used for cleaning and separation of other industrial fluids.
NumberGS 024
TitleCentrifuge
Type Z800(K-)-H-A-Turbo-Floc
LocationNL
Year Of Manufacture2007
DescriptionThe RÖSLER centrifuge has been specifically designed for the cleaning of process water of vibratory (mass) finishing installations. The process water is cleaned in circulation and re-used in each case (with no discharge into the sewer). Of course, this machine is also used for cleaning and separation of other industrial fluids.
NumberGS 025
TitleHigh Energy Disc System
Type FKS 02.1-E
LocationNL
Year Of Manufacture2007
DescriptionThis high energy disc system installation is very suitable for the removal of burrs and the radiusing of corners / sides in short cycle times. The grinding stones (chips) can be unloaded extremely easy in just one operation.
NumberGS 015
TitleHigh Energy Disc System
Type FKS 06.1E
LocationNL
Year Of Manufacture1997
DescriptionThis High Energy Disc System is particularly suitable for the deburring and radiusing of smaller parts in a relatively short period of time. The system is especially comfortable to use because of the integrated separation unit.
NumberGS 017
TitleHigh Energy Disc System
Type FKS 06.1 E-SA
LocationDE
Year Of Manufacture2011
DescriptionThis High Energy Disc System is particularly suitable for the deburring and radiusing of smaller parts in a relatively short period of time. The system is especially comfortable to use because of the integrated separation unit.
NumberGS 021
TitleHigh Energy Disc System
Type FKS 06.1-E
LocationNL
Year Of Manufacture2010
DescriptionThis high energy disc system installation is very suitable for the removal of burrs and the radiusing of corners / sides in short cycle times. The grinding stones (chips) can be unloaded easily in just one operation.
NumberGS 027
TitleHigh Energy Disc System
Type FKS 02.1-E
LocationNL
Year Of Manufacture2010
DescriptionThis high energy disc system installation is very suitable for the removal of burrs and the radiusing of corners / sides in short cycle times. The grinding stones (chips) can be unloaded easily in just one operation.
NumberGS 033
TitleRotary Dryer
Type RT 150 Euro
LocationNL
Year Of Manufacture1999
DescriptionThe rotary dryer is mainly used for drying large numbers of products with drying agents to give immaculate, shiny surfaces. The machine is very easy to combine with a rotary vibrator. Wet components travel automatically through the pre-heated drying media around the process chamber and are then separated on a polyurethane coated separation screen.
NumberGS 011
TitleRotary Dryer
Type RT 250 Euro
LocationNL
Year Of Manufacture2008
DescriptionThe rotary dryer is mainly used for drying large numbers of products with drying agents to give immaculate, shiny surfaces. The machine is very easy to combine with a rotary vibrator. Wet components travel automatically through the pre-heated drying media around the process chamber and are then separated on a polyurethane coated separation screen.
NumberGS 018
TitleRotary Dryer
Type RT 150 Euro
LocationNL
Year Of Manufacture2000
DescriptionThe rotary dryer is mainly used for drying large numbers of products with drying agents to give immaculate, shiny surfaces. The machine is very easy to combine with a rotary vibrator. Wet components travel automatically through the pre-heated drying media around the process chamber and are then separated on a polyurethane coated separation screen.
NumberGS 019
TitleRotary Dryer
Type AS-2
LocationNL
Year Of Manufacture2015
DescriptionThe rotary dryer is mainly used for the industrial drying of very small and delicate parts. The throughput of the machine is designed to allow large numbers of parts.
NumberGS 032
TitleRotary Vibrator
Type R 185 So
LocationNL
Year Of Manufacture1997
DescriptionThis round vibrator is ideally suited for part-to-part surface finishing workpieces
NumberGS 013
TitleRotary Vibrator
Type R 125 EC
LocationNL
Year Of Manufacture2004
DescriptionThis rotary vibrator is a multifunctional machine for both deburring and polishing. The machine can process large quantities of small semi-finished and endproducts.
NumberGS 016
TitleRotary Vibrator
Type R 420 EC
LocationNL
Year Of Manufacture2006
DescriptionThis rotary vibrator is a multifunctional machine for both deburring and polishing. The machine can process large quantities of small semi-finished and endproducts.
NumberGS 020
TitleRotary Vibrator
Type R 420 E
LocationDE
Year Of Manufacture2008
DescriptionThis rotary vibrator with wedge profile in the outer wall of the process channel speeds up and optimizes the processing of small, delicate parts by preventing them from sticking to the channel wall. The wedge is also very useful for part-on-part processing without media. Incl. fresh water metering unit, switch unit, frequency inverter
NumberGS 023
TitleRotary Vibrator
Type R 420 EC
LocationNL
Year Of Manufacture2012
DescriptionThis rotary vibrator is a multifunctional machine for both deburring and polishing. The machine can process large quantities of small semi-finished and endproducts.
NumberGS 026
TitleRotary Vibrator
Type R 620 KF
LocationNL
Year Of Manufacture2006
DescriptionVery large rotary vibrator in flat design. The machine is equipped with new PU lining. The large capacity of the machine makes it ideally suited for polishing large / heavy equipment.
NumberGS 030
TitleRotary Vibrator
Type R 185 So
LocationNL
Year Of Manufacture1996
DescriptionThis round vibrator is ideally suited for part-to-part surface finishing workpieces.
NumberGS 031
TitleTrough Vibrator
Type OV 10 FC
LocationNL
Year Of Manufacture2001
DescriptionThe trough with pneumatic vibrator soundproof cover is used for the treatment of very large parts. The machine is also equipped to treat parts in separate compartmens.
NumberGS 012
TitleTrough Vibrator
Type R 650/900 TS-30-KF
LocationNL
Year Of Manufacture2000
DescriptionThe trough vibrator is powered by two engines. This machine is ideally suited for heavy-duty deburring and polishing processes at 3000 rpm.
NumberGS 014
TitleTrough Vibrator
Type RMO 180/530 TE-30
LocationDE
Year Of Manufacture2012
DescriptionThis small trough vibrator is especially suitable for the processing of small parts or individual treatment of larger parts with dimensions of max. 480 mm length and 100 mm width. The system is encapsulated entirely as a unit including sound protection and integrated water supply.
NumberGS 022
TitleTrough Vibrator
Type R 650/900 TS-30
LocationNL
Year Of Manufacture2000
DescriptionThe trough vibrator is powered by two engines. This machine is ideally suited for heavy-duty deburring and polishing processes at 3000 rpm.
NumberGS 028
TitleTrough Vibrator
Type R 800/2000 TS-15
LocationNL
Year Of Manufacture1994
DescriptionThe trough with pneumatic vibrator soundproof cover is used for the treatment of very large parts. The machine is also equipped to treat parts in separate compartmens.
NumberGS 029